CHECK OUT OUR DEALS!
Increase airflow with the Lian Li O11DE-4W Front Mesh Kit. Designed to replace the tempered glass front on the Lian Li O11D EVO, this replacement panel features a fine mesh. This kit includes fan brackets that support either three 120mm or two 140mm fans, to enhance the airflow and cooling potential granted by the mesh. With extensive compatibility, this kit can be used in either Normal or Reverse mode, as well as with the Lian Li O11DE-2W Upright GPU Kit.
LIAN LI O11DE-4W FRONT MESH KIT AT A GLANCE:
- Front mesh panel kit with included fan brackets for Lian Li O11D EVO
- Supports either 3 x 120mm or 2 x 140mm fans
- Compatible with Normal and Reverse mode
- Can be used with the Upright GPU Kit
- 1.5mm diameter mesh for superior airflow
- Available in white, grey, or black
Enhance airflow with the Lian Li O11DE-4W Front Mesh Kit. This kit includes a front panel with a fine, 1.5mm diameter mesh and fan brackets, to fully optimise the cooling potential of your case. The fan brackets can host either three 120mm or two 140mm fans, affording you great flexibility with your cooling system.
With extensive compatibility, the Lian Li O11DE-4W can be used in Normal or Reverse mode. Additionally, this kit can be used when mounting your GPU upright beside the motherboard. In fact, it is recommended for the direct ventilation to the graphics card and CPU. It should be noted that installing fans on the front mesh panel will affect what size GPU can be installed. Please see this table for further details:
|X||GPU Width||GPU Thickness||Compatibility|
|≤ 60mm (3 slots)
≤ 62mm (3 slots)
|≤ 40mm (2 slots or with water block)
≤ 62mm (3 slots)
Yes, with conditions*
*Ensure the L-bracket from the Upright GPU kit does not interfere with the GPU power connector or the 140mm fan.
FOR THE O11D EVO
The Lian Li O11DE-4W Front Mesh Kit was designed to be used with the latest addition to the O11D range, the O11D EVO. There are three kits available, in white, grey, or black.
LIAN LI O11DE-4W FRONT MESH KIT SPECIFICATIONS:
|Model||O11DE-4W Front Mesh Kit|
|Bracket Dimension||435.3mm x 218mm x 14.45mm
L x D x H
0.8mm mesh steel
|Fan Support||3 x 120mm or 2 x 140mm|