CHECK OUT OUR DEALS!
One of Kolink’s most popular cases, the Citadel Mesh is now available as a full-sized, ATX case. The Kolink Citadel Mesh ATX PC Case is equipped with support for a wide selection of gaming hardware and cooling components, expertly displayed by the tempered glass side panel. With its mesh front panel and stylish side ventilation, this case has phenomenal natural airflow which is further enhanced by the four, pre-installed Kolink Umbra ARGB/PWM fans. User-friendly features paired with intelligent cable management and interior design ensure this case is perfect for all PC building enthusiasts.
KOLINK CITADEL MESH ATX MID-TOWER PC CASE AT A GLANCE:
- ATX addition to the Kolink Citadel range
- Easy access tempered side panel thanks to rear screws
- Sleek aesthetics with matte black finish and RGB lighting
- Outstanding natural airflow from mesh front panel and side ventilation
- Four pre-installed Kolink Umbra 120mm ARGB/PWM fans with Umbra Core controller
- Comprehensive support for water cooling hardware, including a 420mm radiator
NOW IN ATX
The Citadel Micro-ATX is one of Kolink’s most popular series. Now, the Kolink Citadel Mesh is available as an ATX mid-tower. This full-sized chassis bears many of the aesthetic markers of the range, making it a wonderful addition with its sleek, matte black finish.
Creating phenomenal natural airflow, the front mesh panel has been elevated by side ventilation. Additionally, there are four, pre-installed Kolink Umbra 120mm ARGB/PWM fans across the Kolink Citadel Mesh ATX. Achieve full control of these fans and your gaming PC’s airflow with the included Kolink Umbra Core controller. This allows you to adjust fan speeds as well as the RGB lighting with the press of a button.
What’s more, the Kolink Citadel Mesh ATX is a fantastic showcase of all your high-end gaming hardware. The side panel is manufactured from tempered glass, putting the interior on full display. This panel is held in place by two screws, situated on the rear panel for a sleeker look than their side-mounted counterparts. As a result, you have easy access to your hardware as well as a clean aesthetic.
COMPREHENSIVE COOLING OPTIONS
Across the chassis, there are plenty of mounting options for cooling hardware on the Kolink Citadel Mesh ATX PC Case. Upon the front panel, three of the four pre-installed 120mm fans can be found. Alternatively, these can be swapped for three 140mm fans or a radiator up to 420mm long. The roof has mounts for three fans, either 120mm or 140mm, which could also be utilised for a radiator up to 360mm long. Lastly, the rear panel hosts a singular fan or radiator, at 120mm or 140mm. This is where the final pre-installed Kolink Umbra 120mm fan is mounted.
Thanks to the clever design and spacious interior, the Kolink Citadel Mesh ATX is perfect for custom water-cooling loops, including dual-radiator systems. Plus, with clearance for a CPU cooler up to 180mm tall, the majority of hardware is compatible.
EXTENSIVE HARDWARE SUPPORT
As an ATX form factor case, the Kolink Citadel Mesh ATX can house a wide variety of gaming hardware. Starting with the motherboard, this case can accommodate all common form factors, including E-ATX. To go with this, there are seven horizontal and three vertical expansion slots to accommodate for your PCIe technology. As a result, you can vertically mount your graphics card utilising the Kolink Vertical GPU Kit. However you orientate your graphics card, there is clearance for GPUs up to 380mm long. This more than meets the dimension requirements for majority of GPUs currently available.
Helping to keep the interior tidy, the power supply is held within a dedicated PSU shroud that features the iconic Kolink hexagonal cut-outs, for further ventilation. This area can accommodate for PSUs up to 200mm long, as well as a drive cage that holds two of either 2.5” SSDs or 3.5” HDDs. What’s more, there are additional SSD mounts located on the rear of the motherboard backplate on a removable tray. This holds a two more 2.5” drives, granting you amazing flexibility with your storage solution.
INTELLIGENT CABLE MANAGEMENT
The Kolink Citadel Mesh ATX PC Case’s interior has been carefully designed to maximise on hardware and cooling, as well as providing plenty of cable management options. Thanks to the twelve rubber grommets, four Velcro anchor ties, and two cable routing tubes, you can expertly manage the cables within this build. Plus, the I/O panel has been mounted to the side, further facilitating this notion.
Unlocking extensive connectivity, the I/O panel features one USB 3.2 Gen 2 Type-C, two USB 3.1, a singular USB 2.0, and an HD audio jack. What’s more, next to the power and reset there is an LED button, for easy control of your lighting.
KOLINK CITADEL MESH ATX MID-TOWER PC CASE SPECIFICATIONS:
|Model||Citadel Mesh ATX PC Case|
SPCC 0.7mm steel
|Side Panel||Tempered glass
2 x rear screws
|Motherboard Support||E-ATX / ATX / Micro-ATX / Mini-ITX|
|Expansion Slots||7 + 3|
|GPU Support||Up to 380mm long
Vertical mounting supported with Kolink Vertical GPU Kit
|PSU Support||ATX form factor
Up to 200mm long
|Pre-Installed Fans||4 x Kolink Umbra 120mm ARGB/PWM fans
3 x front
1 x rear
|Full Fan Support||Front: 3 x 120mm or 3 x 140mm fans
Roof: 3 x 120mm or 2 x 140mm fans
Rear: 1 x 120mm or 140mm fan
|Radiator Support||Front: 420mm / 360mm / 280mm
Roof: 360mm / 280mm / 240mm
Rear: 140mm / 120mm
|CPU Cooler Clearance||Up to 180mm tall|
|Drive Bays||2 x 2.5” or 3.5”
2 x 2.5” (removable trays)
|Cable Management||23mm space
12 x rubber grommets
4 x Velcro cable anchors
2 x cable routing tubes
|I/O Panel||1 x USB 3.2 Gen 2 Type-C
2 x USB 3.1
1 x USB 2.0
1 x HD Audio jack
1 x LED button
1 x Power and reset button
|Dimensions||231mm x 485mm x 460mm
W x H x D