Addressable Wing Boost 3 fans from Alpenföhn, Triple set with 3x 140 mm, Digitally addressable RGB-LED lighting (3-pin), PWM-controlled, Includes remote, Receiver, Splitters & screwsThe
Wing Boost 3 RGB combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The eponymous "Wing Boosts" consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow. The triple-set offered here consists of three fans and an RF receiver, splitter cables and a remote control for synchronising the set of fans.
THE FEATURES OF THE ALPENFÖHN WING BOOST 3 RGB FANS AT A GLANCE:
- Three 140 mm fans with digitally addressable RGB lighting
- Hydrodynamic bearings for high performance, quiet operation and increased durability
- Optimised rotor blades deliver the perfect balance between static pressure and airflow
- Operates at 400 to 1.500 RPM
- 4-Pin PWM- and 3-pin RGB connection
- Includes RGB- and PWM splitter, RF remote and receiver with screws
- ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome
WING BOOST 3 RGB: POWERFUL 140 MM FAN
The
Wing Boost 3 RGB is a
PWM-controlled,
140 mm fan that is equally at home operating as a case fan, CPU cooler or radiator cooler. The fan operates at between
400 and 1500RPM, producing a massive airflow of
100,6 m³/h with a static pressure of
2,19 mm H2O.
The
hydraulic bearings and the
rubber dampeners in the fan frame help to guarantee the fans operate whisper-quietly, even at low speeds. At full load, the
Wing Boost 3 RGB produce noise levels of at most
19 dB.
ADDRESSABLE RGB-LED LIGHTING IN THE FRAME
The
Alpenföhn Wing Boost 3 RGB is equipped with digitally addressable RGB-LED lighting. The manufacturer has integrated a
glowing ring with up to 16,8m colours into the fan frame, which shines a subtle light onto the fan wheel. This can be controlled by means of a 3-pin RGB connector with a compatible motherboard or controller. The
Wing Boost 3 RGB is compatible with
ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.
Included in this set, in addition to the
three fans from the
Alpenföhn Wing Boost 3 RGB range, are
all the necessary accessories to synchronise the PWM signals and the RGB-LED lighting. The lighting can be controlled via the bundled remote control.
Technical Details:
- Dimensions: 140 x 140 x 25 mm (W x H x D)
- Material: plastic, rubber
- Colour: Black
- Volume: max. 19 dB(A)
- Speed: 400 - 1.500 rpm
- Airflow: max. 100.6 m³/h
- Voltage: 12 V
- Voltage range: 7 - 13,2 V
- Rated power: 1.32 W
- input current: 0.11 A
- Connection:
4-Pin PWM
3-Pin RGB (addressable)
- Lighting: RGB (16,8m colours)
- Accessories:
3x Alpenföhn Wing Boost 3 RGB
12x Case screws
12x Screws for radiator
1x RF remote
1x RF receiver
1x RGB splitter
1x PWM splitter
