Gorilla Gaming Customised Erector Addressable RGB GPU Anti-Sag Support Bracket


Customised Erector Addressable RGB GPU Anti-Sag Support Bracket
MAKE/BRAND Gorilla Gaming
DIMENSIONS 6mm thick with width/length to suit your GPU
DESCRIPTION Customised Erector Addressable RGB GPU Anti-Sag Support Bracket

Add a Custom GPU Backplate to your build to give it some character and personalise it your way.

Customise your backplate with any of the following:
- Your gamer tag
- Brand/Logo – example: Asus ROG, Razer, Aorus etc.
- Any text
- Any other design or artwork
Our GPU Anti Sag Support Brackets will fit all current GTX/RTX and RX Series cards. The bracket will fit many models ‘out the box’ however some larger cards may require spacers to bring the bracket out slightly so that it does not clash with the fans.

Please see the image below on how to mount a spacer and how to check if you require any spacers.

4x Spacers and long screws are included in with the RGB version of our Erector Anti-sag Support Bracket.

Please check you have enough clearance next to the screw holes for the bracket. Some cases have rivets in that may obstruct these brackets fitting smoothly.

Compatible with all lighting software

Our Addressable RGB LED GPU Support Brackets are powered by a 3 Pin ARGB header that can usually be found on most current and modern motherboards.

These are often labeled: ADD_HEADER, JRAINBOW, D_LED or ADDR_LED

If you do not have a 3 Pin ARGB header you will need a 3 button ARGB controller to control the lighting on this bracket. These are available to buy here.

These are NOT compatible with 4 pin 12v RGB headers.

If you are not sure if your motherboard has an addressable header or not, feel free to contact us with your motherboard model and we can check for you.

Once you’ve placed your order we will contact you by telephone or email to discuss your design. Alternatively you can email these directly to us once you’ve placed your order.
INSTALLATION Simply screw the bracket over your current GPU screw holes and adjust accordingly to support your GPU.

Screws are included which are long enough to mount the bracket as standard. If you are using spacers then you will need to purchase longer screws additionally as you will need the right length to fit the amount of spacers you are using.

Connect the 3 Pin cable to your motherboard or controller and you’re all set to go.
LEAD TIME 1-2 Working Days (plus shipping time)
NOTE All lead times are estimates. You will be given a more accurate lead time and delivery estimate once your order has been placed and confirmed

Please check all compatibility and artwork prior to confirming your order. Once shipped all custom orders are not refundable.

Feel free to contact us for further information prior to placing your order.

HANDCRAFTED   Hand-crafted in our own Gorilla Lab in the UK    
Additional Information

Additional Information

Specification No
Manufacturer Gorilla Gaming
Reviews No
PDF Url No
Available To Buy In Store and Online



Available Online
Available In-Store
  • Collect and Return
  • 1 Free Delivery
  • Buy with Confidence
  • Store
  • Gorilla