
CHECK OUT OUR DEALS!
FAN COUNT
FAN SIZE
RADIATOR
LEDS
The newly introduced MAG CORELIQUID Series has everything you're looking for in a liquid cooler, ranging from quality materials that provide reliable durability to heat dissipation technologies that are extremely effective. Users can even enjoy perks like ARGB lighting and a 270-degree rotating blockhead that is simple to use. On top of that, the blockhead boasts a unique irregular aesthetic that is both stylish and artistic. Every single component of the MAG CORELIQUID Series is designed with the end goal in mind: to provide effective cooling without any compromise.
Features:
ROTATABLE BLOCKHEAD - Mount the cold plate at any orientation, turn the blockhead up to 270 degrees, and keep it upright.
RADIATOR PUMP DESIGN - The pump has been integrated into the radiator for sound dampening and noise reduction. Additionally, placing the pump into the radiator also increases the pump's life expectancy by moving it away from the heat source.
PUMP MOTOR RESONANCE ELIMINATION - A durable three phase motor at the core of the pump generates minimal vibrations for long-lasting operation.
HIGH THERMAL DISSIPATION - A split pathway through the radiator rapidly dissipates heat, cooled liquid is then pumped back into the loop.
EVAPORATION PROOF TUBING - Constructed with three layers of netted plastic tubing and a reinforced mesh exterior.
EXTENSIVE COMPATIBILITY - Robust yet built for flexibility, MAG CORELIQUID Series has been designed with a secure installation bundle with compatibility on a number of Intel and AMD motherboards.
SPECIFICATION:
Fan
- Number of Fans: 2
- Fan Dimensions: 140 x 140 x 25mm
- Fan Speed: 500~1800 RPM
- Fan Lighting: ARGB
- Fan Air Flow: 84.36 CFM
- Fan Noise Level: 14.8~33.28 dBA
- Fan Air Pressure: 2.29 mm-H2O
- Fan Bearing: Two Ball Bearing
- Fan Life Expectancy: 70,000 hours
- Fan Rated Voltage: 12V DC
- Fan Rated Current: 0.19 A
- Fan Power Consumption: 2.28 W
- PWM Mode: Yes
- Cable Length (5V ARGB / PWM cable): 550 / 350mm; 21.65 / 13.78 inches
- ARGB Cable Connector: Pin + Socket
Radiator
- Radiator Material: Aluminum
- Radiator Dimensions: 312 x 140 x 27mm
- Water Cooling Pipe Length: 400mm / 15.75 inches
Pump/Waterblock
- Block Dimensions: 80.57x 66.82 x 48.58mm / 3.17 x 2.63 x 1.91 inches
- Block Lighting: ARGB
-Pump Life Expectancy: 100,000 hours
- Pump Noise Level: 18 dBA
- Pump Load Current: 0.34A
- Pump Power Consumption: 4.08W
- Pump Speed: 4200 RPM
- Pump Rated Voltage: 12V DC
- ARGB 5V Cable Length: 400mm / 15.75 inches
- ARGB Cable Connector: Pin + Socket
Compatibility
- Intel: LGA 1150/1151/1155/1156/1200/1700 - LGA 1366/2011/2011-3/2066
- AMD: AM4/FM2+/FM2/FM1/AM3+/AM3/AM2+/AM2
Good quality aviator cable
Slight hiccup in the ordering process, they went above and being to fix it! Really impressed, they’ll be my go to for IT equipment going forward!!
I ordered a custom keyboard with milky yellow pro switches and a few mods. I ordered it already assembled out of a lack of time and it came in really quickly.
When I got the chance, I opened it to take a few changes and was really pleased with the quality. It was gasket mount despite not having had to option to choose that on the website and it had case foam. A tape mod later the board sounds brilliant. The switches are well lubed… can only recomment and look forward to my next order 😊
This case is great loads of potential, for fan placement, cable management, ease of part placement and overall visual look in any colour
it is very good
If you’re after something clacky look no further, these switches are also super poppy. I would spring swap them tho since the stock 57g spring is too light imo
Phanteks D30 Black Reverse Airflow D-RGB 120mm PWM Fans Triple Pack
Had great service and quick delivery
Went for the red switches, absolute fantastic keyboard to use. Layout is quite small so possibly takes some getting used to but loving it.
Happy with this PSU. Picked it because it had ATX 3.0 and PCIE 5 standards including the 12VHPWR connector without the need for any adaptors. There is an option for silent mode should you want it as well.
I would love a set of keycaps with just the F Row - or to have the F row have light shine through and the multi-media options to be secondary (underneath).
The programs and games I use and play rely on the F Row a lot and its hard to see this F Row in a dim room - despite the RGB being at its brightest.
That's my only gripe. Everything else I love.
It's expensive but it's one of the few 80 Plus Platinum PCIE5 ATX 3.0 power supplies available at the moment.
It's extremely well built, compact and quiet. I've been running it for a few weeks now and I'm extremely pleased how it handles power deliver to my 3080, I'd previously experienced issues where the graphics card could produce sudden power demand spikes which would cause system instability.
Since upgrading to the MEG Ai1300P I've had no such issues.
You get loads of cables, they are pretty good quality but could maybe do with integrated combs to make things neater.
All in all I'm impressed and would recommend!
I needed a new PSU for my build and bought this as it didn't cost much more and had the new ATX 3.0 and PCIE 5.0 specs.
The 1000W power is way more than I need but the beauty of this his power unit is that I believe the silent fan mode kicks in at less than 50% load. In my use case this means it will always be silent under 500W until I upgrade to a more power hungry CPU/GPU.
Effectively I have a 100% silent build now. Passive CPU cooling, passive GPU cooling and a silent PSU. Case fans are off unless system is under super heavy load.
Has worked flawlessly since installed.